Thank you for your interest. We will get back to you very shortly.
There was an error trying to send your request. Please try again later.

General Specifications

The digital repeater RD985 is the heart for multi-cell conventional DMR radio networks and was developed according to the ETSI standard for DMR. It offers an ergonomic design, reliability and outstanding digital functions for sophisticated communication. RD985 – Your digital advantage over your competitors!

Frequency ranges

VHF: 136 – 174 MHz
UHF: 400 – 470 MHz / 450 – 520 MHz
Supported operating modes
  • DMR Tier II
  • Analog

DMR Tier II gemäß ETSI TS 102 361-1/2/3
Number of channels

16
Number of zones

1
Channel spacing

12.5 / 20 / 25 kHz (analog)

12.5 kHz (digital)
Operating voltage

13.6 ± 15% VDC
Max. power consumption (in stand by)

≤ 0.8 A
Max. current consumption (during transmission)

≤ 11 A
Frequency stability

±0.5 ppm
Antenna impedance

50 Ω
Dimensions (H × B × T)

88 x 483 x 366 mm
Weight

8.5 kg
LCD display

220 x 176 pixels, 262,000 colours, 2.0 inches, 4 rows

Transmitter

Transmitting power

1 – 50 W
Modulation

11K0F3E at 12.5 kHz
14K0F3E at 20 kHz
16K0F3E at 25 kHz
4FSK digital modulation

12.5 kHz (data only): 7K60FXD
12.5 kHz (data and voice): 7K60FXW
Interfering signals and harmonics

-36 dBm (< 1 GHz) -30 dBm (> 1 GHz)
Modulation limiting

± 2.5 kHz at 12.5 kHz
± 4.0 kHz at 20 kHz
± 5.0 kHz at 25 kHz
Noise cancellation

40 dB at 12.5 kHz
43 dB at 20 kHz
45 dB at 25 kHz
Adjacent channel selectivity

60 dB at 12.5 kHz
70 dB at 20/25 kHz
Audio response

+ 1 dB to - 3 dB
Audio distortion

≤ 3 %
Digital vocoder type

AMBE +2™

Receiver

Sensitivity (analog)

0.28 μV (12 dB SINAD)
0.22 μV (typical) (12 dB SINAD)
0.4 μV (20 dB SINAD)
Sensitivity (digital)

0.3 μV / BER 5%
Adjacent channel selectivity

TIA-603: 65 dB at 12.5 kHz / 75 dB at 20 and 25 kHz
ETSI: 65 dB at 12.5 kHz / 70 dB at 20 and 25 kHz
Intermodulation

TIA-603: 75 dB at 12.5/20/25 kHz
ETSI: 70 dB at 12.5/20/25 kHz
Spurious response rejection

TIA-603: 80 dB at 12.5 / 20 / 25 kHz
ETSI: 80 dB at 12.5 / 20 / 25 kHz
Signal-noise ratio (S/N)

40 dB at 12.5 kHz
43 dB at 20 kHz
45 dB at 25 kHz
Nominal audio power output

0.5 W
Audio distortion

≤ 3 %
Audio response

+1 dB to -3 dB
Conducted spurious emission

< 57 dBm

Environmental conditions

Operating temperature range

-30 °C to +60 °C
Storage temperature range

-40 °C to +85 °C
Relative humidity

< 95 %

Features marked with * are available in future versions of the product.

All technical data were tested according to the respective standards. Due to continuing development, technical changes are reserved.